Wireless Dynamic Tilt Sensor
Wireless dynamic tilt sensor for structural inclination monitoring with +/-90 degree range, 0.0055 degree minimum resolution, 1 to 50 Hz sampling, DC to 10 Hz bandwidth, 4G transmission, IP66 enclosure, and 9-24 VDC power.
System Category
DL-WM
Signal Type
Dynamic tilt
Communication
4G wireless transmission
Application Fit
Typical applications for this product
Industrial Equipment Monitoring
Monitor rotating machinery and industrial equipment condition including vibration, torque, shaft power, rotational speed, shaft torsional vibration, and operational condition trends.
Typical configuration reference
Cultural Heritage Monitoring System
Monitor crack evolution, structural vibration response, tilt, displacement, long-term deformation, rock-mass fissure evolution, weathering-related structural degradation, stability trends, and environmental or human-activity impact for protected heritage assets.
Typical configuration reference
Civil Infrastructure Structural Monitoring
Monitor civil infrastructure deformation, strain, vibration, displacement, tilt, cracks, settlement, GNSS movement, cable force, seismic response, and construction-stage structural behavior.
Typical configuration reference
Research & Engineering Testing
Capture modal response, vibration response, dynamic strain, torque, speed, temperature, pressure, force, displacement, and synchronized multi-channel data for engineering verification.
Typical configuration reference
Product Image and Application Context
Visual reference for Wireless Dynamic Tilt Sensor
Product images are used when available for RFQ evaluation and product recognition.
Primary Product Image
Product image configured for this product.
Bridge
Typical surface mounted base with four m4 screws deployment for project configuration.
Building
Typical surface mounted base with four m4 screws deployment for project configuration.
Wind
Typical surface mounted base with four m4 screws deployment for project configuration.
Technical Specifications
Category
DL-WM
Measurement Range
+/-90 deg
Sampling Rate
1 to 50 Hz sampling; DC to 10 Hz bandwidth
Communication Protocol
4G wireless transmission
Protection Level
IP66
Power Supply
9-24 VDC
Application Tags
Bridge, Building, Wind, Port, Heritage
Installation Type
Surface mounted base with four M4 screws
Engineering Applications
Where this DL product is applied
Three-axis tilt output supports bridge, high-rise, tower, port, and heritage-structure inclination monitoring.
The +/-90 degree range and 0.0055 degree resolution support dynamic tilt and trend analysis.
4G transmission and IP66 enclosure support outdoor distributed monitoring points.
Technical basis may reference ISO 9001, GB/T 191, JJF1119, GJB 150, and GB/T 17626 series tests.
Typical Use Cases
Typical monitoring use cases
Bridge, tower, and high-rise tilt monitoring where wireless communication is preferred.
Heritage and port structures requiring dynamic inclination monitoring without long cable routes.
System Integration Context
Sensor, DAQ, and software context
Install the sensor in close contact with the measured surface and verify the measurement direction.
Confirm power supply, 4G signal quality, and waterproof enclosure requirements before quotation.
Retain applicable technical references including ISO9001, JJF1119-2004, GJB150, GB/T 17626, and GB/T 4208.